The foundation’s strength depends on the stability of the materials under the foundation. When the concrete foundation is poured, there is a void left beneath the home. This void is a normal part of the construction process. One of the final steps in finishing the foundation is to fill this void. These are the steps taken to fill the void and establish stability under the foundation.
A small hole is left after the foundation is poured. Once the concrete is cured, the Mud Pumping service in Mississippi rolls in to begin the process. A hose is pushed into that hole as far as possible. Once the hose is in place and ready to go, the pumping begins to fill the void with the slurry of pressurized mud.
The mud starts flowing around the support structures and into the void spaces. If it is a large foundation, there can be several holes that have to be filled. In this case, each hole is filled until the mud starts spilling over. Pumping continues until the entire void is filled with the mud. This can take several trucks of mud, depending on the size of the home and the space needed to be filled.
After the Mud Pumping service in Mississippi has filled the void, the excess mud is cleaned away from the holes. These spaces are then filled with a layer of concrete to seal them off. A layer of waterproofing plastic is also added to help prevent the moisture of the mud from seeping up into the basement area. Once the concrete is completely dry, the work on the foundation is considered to be finished.
These are the steps of pumping mud into the foundation. While this is the last step of a foundation installation, it is also a necessary step in the process. The mud helps to provide support and stability for the poured foundation. For more information on your home’s foundation, contact Ewing and Ray Foundation Services Inc. today. Since every home relies on their foundation for support, the foundation has to be properly built and filled to provide that support.
